Carp Fishing Knots

carp fishing knots

Carp Quest is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Carp is a pretty challenging fish species for most fishermen. A carp fish will probably put up a good fight when you try to catch it.

But if you learn how to make the best carp fishing knots and when to use each of them, things will be much easier for you the next time. Now let’s walk you through all the knots one by one!

#1 The Blood Knot

blood knot

The blood knot works best for fluorocarbon lines than other types such as braided lines. It’s best used to join two lines of the same diameter. To make a blood knot, do the following:

  • Pass the line through the hook’s eye and wrap it 4-6 times
  • Pass the tag end through the small loop (should be the one near the hook)
  • Wet the knot with saliva and pull the line down gently to create the blood knot

#2 The Knotless Knot

Knotless Knot

The knotless knot is one of the most versatile carp fishing knots out there, and it’s easy to tie too. You can tie this knot (or hair rig) with a wide range of hair rigs. Sweet corn, large pellets, and dough balls are good bait choices to use with knotless fishing knots.

This knot provides your fishing hook with adequate exposure by keeping the bait clear of the hook, making it more likely for you to catch that challenging carp fish.

To tie a knotless knot, follow these instructions:

  • Pass your fishing hook line through the back of the hook’s eye to form the hair section
  • Wrap the line around the hook 7-8 times to maintain the position of the hair section
  • Pass the tying line back through the hook’s eye and pull the knot gently to create a knotless carp fishing knot
  • Make sure that the hair hasn’t twisted by observing the hook’s back; if the hair section is sliding off the back, you’re good to go

#3 The Uni Knot

uni knot

The uni knot, also known as the grinner knot, is one of the best fishing knots for tying to swivels and attaching hooks. It’s one of the most popular knots out there and works equally well on strong and light lines for all fish species, including carp.

The grinner knot should also get the job done no matter what your casting technique is. You can use it with any line except fluorocarbon. If you want to tie two sections together, creating two uni carp fishing knots would also work well.

To create a grinner knot, follow these steps:

  • Keep the eye of the fishing hook straight and pass the line through it while pulling it parallel to the standing line
  • Create a backward loop towards the eye to complete the loop
  • Pass the tag end wrapped over the double line 5 times
  • Pull the tag end as tight as you can, depending on how thick your line is
  • Make sure that the uni knot slides towards the eye by applying adequate pressure to the standing line

On a side note, keep in mind that in case you’re attaching a swivel, you need to pass the line through the eye of the hook twice to secure it.

#4 The Figure of 8 Loop Knot

Figure of 8 Loop Knot

The figure of 8 loop knot is pretty simple, making it one of the best fishing knots for beginners. It’s great for creating a hair to hook up your bait to. Here’s how to tie an eight knot:

  • Double over the line material to create a single loop
  • Fold the line again to create a double loop
  • Twist the single loop around the line and pull it through the double loop to create a figure of 8 knot
  • Wet the knot with saliva
  • Hold the loop knot and pull the line down to reduce the size of the knot and keep it tight
  • Cut off the tail, and there you have it, you’ve created an eight knot

This loop is very useful for linking up anything with an eye. Not to mention, you can use 2 loops to join 2 separate lines.

Additionally, you can create an even smaller figure of 8 loop with a loop tyer tool. To create it, hold the loop line with your index finger and pull the middle of the line with the tool.

Then, rotate the tool and pass the open loop through the gap in the tool. Wet the line with saliva and pull it down to the hook part of the tool to tighten the knot. Finally, cut off the tail and remove the fishing line from the tool.

#5 The Palomar Knot

palomar knot

The Palomar knot is one of the best carp fishing knots for fishermen that use a braided fishing line. It’s as close as you can get to a full knot. You can use it to snap links, lures, hooks, or even tye swivels. Here’s how to nail a Palomar knot:

  • Double your fishing line and pass the end of the loop through the fishing hook’s eye
  • If your hook’s eye is too small, you can pass the end of the line through it, then double the line back and pass the end of the line back through the eye again from the other side
  • Create an overhand knot with the fishing hook and keep it hanging downwards
  • Hang the overhand knot using your forefinger and thumb, then pass the line over the hook
  • Pass the loop right above the hook’s eye and pull the fishing line and the tag end to secure the knot
  • Cut off the end

#6 The Shock Leader Knot

Shock Leader Knot

The shock leader knot is suitable for linking a shock leader to your main fishing line. So, for joining lines together, the shock leader knot is one of the most reliable knots to get this job done.

To form a shock leader knot, follow these steps:

  • Create a simple knot with your shock leader
  • Make an overhand loop and pass the line on the same side as the shock leader
  • Pass the main line through the side of the loop
  • Pull the loop in the leader to tighten it until it grips the reel line securely
  • Continue tightening the loop as necessary
  • Create a loop in the mainline and position it in front of the shock leader
  • Loop over the shock leader 5 times and keep pulling
  • Tighten the fishing line’s coil and slide it up to the knot in the shock leader
  • Moisten and tighten the fishing line, then cut off the tail
  • Trim the tag end while leaving around 3 mm of shock leader material

#7 The Albright Knot

albright knot

The alright knot isn’t that hard to get right from the first time. It’s quite versatile, but most anglers use it for joining lines. Whether you use a braided line or a monofilament line, the Albright knot can come in handy.

To create an Albright knot, check these instructions:

  • Create a loop with one of the lines and pull one foot of the other line through it
  • Wrap the unlooped line about 10 times around the looped line
  • Feed the end of the line through the looped line
  • Pull both ends of the unlooped lines to create a strong knot
  • Make 2 overhand knots at the tang end of the wrapped line for extra security

#8 The Improved Clinch Knot

Improved Clinch Knot

The improved clinch knot is simple yet very effective. It’s one of the best knots for securing your fishing line with the fishing lure. It’s compatible with many types of lines, so if you use a fluorocarbon, monofilament, or braided line, this knot won’t disappoint.

Here’s how to tie an improved clinch knot:

  • Pass the fishing line through the fishing hook’s eye
  • Wrap the tag end around the standing end 4-5 times; a circle should be created at the end
  • Pass the tag end through the loop at the end; then through the loop created by the standing end
  • Tighten your clinch knot by pulling the long end and holding the hook after ensuring that the knot is well-organized, but don’t pull the smaller end
  • Trim the tag near the hook

#9 The Four Turn Water Knot

Four Turn Water Knot

The four turn water carp fishing knot is neat and can be utilised to connect hook lengths and light and strong lines of different diameters. To tie a water carp fishing knot, follow these steps:

  • Overloop the main line and hook length
  • Create a circular loop
  • Pass the fishing hook length and main line through the circle a few times
  • Wet the loop knot with saliva
  • Pull the knot from both sides to tighten it
  • Cut off the end

Final Words

So that was everything you needed to know about the best carp fishing knots and when to use each of them.

Most of these carp fishing knots are pretty straightforward, and you should be able to nail them from the first shot if you follow the instructions carefully.

Did you enjoy this guide? Let us know!

Leave a Comment

Your email address will not be published.